深夜福利国产精品,日韩一区二区三区精品视频,欧美国产亚洲精品

主頁 > 知識庫 > 6種查看Linux進程占用端口號的方法詳解

6種查看Linux進程占用端口號的方法詳解

對于 Linux 系統管理員來說，清楚某個服務是否正確地綁定或監聽某個端口，是至關重要的。如果你需要處理端口相關的問題，這篇文章可能會對你有用。

端口是 Linux 系統上特定進程之間邏輯連接的標識，包括物理端口和軟件端口。由于 Linux 操作系統是一個軟件，因此本文只討論軟件端口。軟件端口始終與主機的 IP 地址和相關的通信協議相關聯，因此端口常用于區分應用程序。大部分涉及到網絡的服務都必須打開一個套接字來監聽傳入的網絡請求，而每個服務都使用一個獨立的套接字。

套接字是和 IP 地址、軟件端口和協議結合起來使用的，而端口號對傳輸控制協議（TCP）和用戶數據報協議（UDP）協議都適用，TCP 和 UDP 都可以使用 0 到 65535 之間的端口號進行通信。

以下是端口分配類別：
0 - 1023：常用端口和系統端口
1024 - 49151：軟件的注冊端口
49152 - 65535：動態端口或私有端口

在 Linux 上的 /etc/services 文件可以查看到更多關于保留端口的信息。

# less /etc/services
# /etc/services:
# $Id: services,v 1.55 2013/04/14 ovasik Exp $
#
# Network services, Internet style
# IANA services version: last updated 2013-04-10
#
# Note that it is presently the policy of IANA to assign a single well-known
# port number for both TCP and UDP; hence, most entries here have two entries
# even if the protocol doesn't support UDP operations.
# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
# are included, only the more common ones.
#
# The latest IANA port assignments can be gotten from
# http://www.iana.org/assignments/port-numbers
# The Well Known Ports are those from 0 through 1023.
# The Registered Ports are those from 1024 through 49151
# The Dynamic and/or Private Ports are those from 49152 through 65535
#
# Each line describes one service, and is of the form:
#
# service-name port/protocol [aliases ...] [# comment]
tcpmux 1/tcp # TCP port service multiplexer
tcpmux 1/udp # TCP port service multiplexer
rje 5/tcp # Remote Job Entry
rje 5/udp # Remote Job Entry
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
systat 11/udp users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote
qotd 17/udp quote
msp 18/tcp # message send protocol (historic)
msp 18/udp # message send protocol (historic)
chargen 19/tcp ttytst source
chargen 19/udp ttytst source
ftp-data 20/tcp
ftp-data 20/udp
# 21 is registered to ftp, but also used by fsp
ftp 21/tcp
ftp 21/udp fsp fspd
ssh 22/tcp # The Secure Shell (SSH) Protocol
ssh 22/udp # The Secure Shell (SSH) Protocol
telnet 23/tcp
telnet 23/udp
# 24 - private mail system
lmtp 24/tcp # LMTP Mail Delivery
lmtp 24/udp # LMTP Mail Delivery

可以使用以下六種方法查看端口信息。

ss：可以用于轉儲套接字統計信息。

netstat：可以顯示打開的套接字列表。

lsof：可以列出打開的文件。

fuser：可以列出那些打開了文件的進程的進程 ID。

nmap：是網絡檢測工具和端口掃描程序。

systemctl：是 systemd 系統的控制管理器和服務管理器。

以下我們將找出 sshd 守護進程所使用的端口號。

方法 1：使用 ss 命令
ss 一般用于轉儲套接字統計信息。它能夠輸出類似于 netstat 輸出的信息，但它可以比其它工具顯示更多的 TCP 信息和狀態信息。

它還可以顯示所有類型的套接字統計信息，包括 PACKET、TCP、UDP、DCCP、RAW、Unix 域等。

# ss -tnlp | grep ssh
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

也可以使用端口號來檢查。

# ss -tnlp | grep ":22"
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

方法 2：使用 netstat 命令

netstat 能夠顯示網絡連接、路由表、接口統計信息、偽裝連接以及多播成員。

默認情況下，netstat 會列出打開的套接字。如果不指定任何地址族，則會顯示所有已配置地址族的活動套接字。但 netstat 已經過時了，一般會使用 ss 來替代。

# netstat -tnlp | grep ssh
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 997/sshd
tcp6 0 0 :::22 :::* LISTEN 997/sshd

也可以使用端口號來檢查。

# netstat -tnlp | grep ":22"
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1208/sshd
tcp6 0 0 :::22 :::* LISTEN 1208/sshd

方法 3：使用 lsof 命令

lsof 能夠列出打開的文件，并列出系統上被進程打開的文件的相關信息。

# lsof -i -P | grep ssh
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 11584 root 3u IPv4 27625 0t0 TCP *:22 (LISTEN)
sshd 11584 root 4u IPv6 27627 0t0 TCP *:22 (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

也可以使用端口號來檢查。

# lsof -i tcp:22
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 1208 root 3u IPv4 20919 0t0 TCP *:ssh (LISTEN)
sshd 1208 root 4u IPv6 20921 0t0 TCP *:ssh (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

方法 4：使用 fuser 命令

fuser 工具會將本地系統上打開了文件的進程的進程 ID 顯示在標準輸出中。

# fuser -v 22/tcp
 USER PID ACCESS COMMAND
22/tcp: root 1208 F.... sshd
 root 12388 F.... sshd
 root 49339 F.... sshd

方法 5：使用 nmap 命令

nmap（“Network Mapper”）是一款用于網絡檢測和安全審計的開源工具。它最初用于對大型網絡進行快速掃描，但它對于單個主機的掃描也有很好的表現。

nmap 使用原始 IP 數據包來確定網絡上可用的主機，這些主機的服務（包括應用程序名稱和版本）、主機運行的操作系統（包括操作系統版本等信息）、正在使用的數據包過濾器或防火墻的類型，以及很多其它信息。

# nmap -sV -p 22 localhost
Starting Nmap 6.40 ( http://nmap.org ) at 2018-09-23 12:36 IST
Nmap scan report for localhost (127.0.0.1)
Host is up (0.000089s latency).
Other addresses for localhost (not scanned): 127.0.0.1
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 7.4 (protocol 2.0)
Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 0.44 seconds

方法 6：使用 systemctl 命令

systemctl 是 systemd 系統的控制管理器和服務管理器。它取代了舊的 SysV 初始化系統管理，目前大多數現代 Linux 操作系統都采用了 systemd。

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Sun 2018-09-23 02:08:56 EDT; 6h 11min ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 11584 (sshd)
 CGroup: /system.slice/sshd.service
 └─11584 /usr/sbin/sshd -D
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Started OpenSSH server daemon.
Sep 23 02:09:15 vps.2daygeek.com sshd[11589]: Connection closed by 103.5.134.167 port 49899 [preauth]
Sep 23 02:09:41 vps.2daygeek.com sshd[11592]: Accepted password for root from 103.5.134.167 port 49902 ssh2

以上輸出的內容顯示了最近一次啟動 sshd 服務時 ssh 服務的監聽端口。但它不會將最新日志更新到輸出中。

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Thu 2018-09-06 07:40:59 IST; 2 weeks 3 days ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 1208 (sshd)
 CGroup: /system.slice/sshd.service
 ├─ 1208 /usr/sbin/sshd -D
 ├─23951 sshd: [accepted]
 └─23952 sshd: [net]
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: Invalid user pi from 95.210.113.142 port 51666
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: input_userauth_request: invalid user pi [preauth]
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:39 vps.2daygeek.com sshd[23911]: Failed password for invalid user pi from 95.210.113.142 port 51670 ssh2
Sep 23 12:50:39 vps.2daygeek.com sshd[23909]: Failed password for invalid user pi from 95.210.113.142 port 51666 ssh2
Sep 23 12:50:40 vps.2daygeek.com sshd[23911]: Connection closed by 95.210.113.142 port 51670 [preauth]
Sep 23 12:50:40 vps.2daygeek.com sshd[23909]: Connection closed by 95.210.113.142 port 51666 [preauth]

大部分情況下，以上的輸出不會顯示進程的實際端口號。這時更建議使用以下這個 journalctl 命令檢查日志文件中的詳細信息。

# journalctl | grep -i "openssh\|sshd"
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[997]: Received signal 15; terminating.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Stopping OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Started OpenSSH server daemon.

查看服務器占用端口是我們系統管理員必須掌握的技能，以上查看Linux進程占用端口號的6種方法至少要會其中的一種

以下是端口分配類別：

0 - 1023：常用端口和系統端口

1024 - 49151：軟件的注冊端口

49152 - 65535：動態端口或私有端口

在 Linux 上的 /etc/services 文件可以查看到更多關于保留端口的信息。

# less /etc/services
# /etc/services:
# $Id: services,v 1.55 2013/04/14 ovasik Exp $
#
# Network services, Internet style
# IANA services version: last updated 2013-04-10
#
# Note that it is presently the policy of IANA to assign a single well-known
# port number for both TCP and UDP; hence, most entries here have two entries
# even if the protocol doesn't support UDP operations.
# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
# are included, only the more common ones.
#
# The latest IANA port assignments can be gotten from
# http://www.iana.org/assignments/port-numbers
# The Well Known Ports are those from 0 through 1023.
# The Registered Ports are those from 1024 through 49151
# The Dynamic and/or Private Ports are those from 49152 through 65535
#
# Each line describes one service, and is of the form:
#
# service-name port/protocol [aliases ...] [# comment]
tcpmux 1/tcp # TCP port service multiplexer
tcpmux 1/udp # TCP port service multiplexer
rje 5/tcp # Remote Job Entry
rje 5/udp # Remote Job Entry
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
systat 11/udp users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote
qotd 17/udp quote
msp 18/tcp # message send protocol (historic)
msp 18/udp # message send protocol (historic)
chargen 19/tcp ttytst source
chargen 19/udp ttytst source
ftp-data 20/tcp
ftp-data 20/udp
# 21 is registered to ftp, but also used by fsp
ftp 21/tcp
ftp 21/udp fsp fspd
ssh 22/tcp # The Secure Shell (SSH) Protocol
ssh 22/udp # The Secure Shell (SSH) Protocol
telnet 23/tcp
telnet 23/udp
# 24 - private mail system
lmtp 24/tcp # LMTP Mail Delivery
lmtp 24/udp # LMTP Mail Delivery

可以使用以下六種方法查看端口信息。

ss：可以用于轉儲套接字統計信息。

netstat：可以顯示打開的套接字列表。

lsof：可以列出打開的文件。

fuser：可以列出那些打開了文件的進程的進程 ID。

nmap：是網絡檢測工具和端口掃描程序。

systemctl：是 systemd 系統的控制管理器和服務管理器。

以下我們將找出 sshd 守護進程所使用的端口號。

方法 1：使用 ss 命令

ss 一般用于轉儲套接字統計信息。它能夠輸出類似于 netstat 輸出的信息，但它可以比其它工具顯示更多的 TCP 信息和狀態信息。

它還可以顯示所有類型的套接字統計信息，包括 PACKET、TCP、UDP、DCCP、RAW、Unix 域等。

# ss -tnlp | grep ssh
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

也可以使用端口號來檢查。

# ss -tnlp | grep ":22"
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

方法 2：使用 netstat 命令

netstat 能夠顯示網絡連接、路由表、接口統計信息、偽裝連接以及多播成員。

# netstat -tnlp | grep ssh
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 997/sshd
tcp6 0 0 :::22 :::* LISTEN 997/sshd

也可以使用端口號來檢查。

# netstat -tnlp | grep ":22"
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1208/sshd
tcp6 0 0 :::22 :::* LISTEN 1208/sshd

方法 3：使用 lsof 命令

lsof 能夠列出打開的文件，并列出系統上被進程打開的文件的相關信息。

# lsof -i -P | grep ssh
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 11584 root 3u IPv4 27625 0t0 TCP *:22 (LISTEN)
sshd 11584 root 4u IPv6 27627 0t0 TCP *:22 (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

也可以使用端口號來檢查。

# lsof -i tcp:22
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 1208 root 3u IPv4 20919 0t0 TCP *:ssh (LISTEN)
sshd 1208 root 4u IPv6 20921 0t0 TCP *:ssh (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

方法 4：使用 fuser 命令

fuser 工具會將本地系統上打開了文件的進程的進程 ID 顯示在標準輸出中。

# fuser -v 22/tcp
 USER PID ACCESS COMMAND
22/tcp: root 1208 F.... sshd
 root 12388 F.... sshd
 root 49339 F.... sshd

方法 5：使用 nmap 命令

# nmap -sV -p 22 localhost
Starting Nmap 6.40 ( http://nmap.org ) at 2018-09-23 12:36 IST
Nmap scan report for localhost (127.0.0.1)
Host is up (0.000089s latency).
Other addresses for localhost (not scanned): 127.0.0.1
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 7.4 (protocol 2.0)
Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 0.44 seconds

方法 6：使用 systemctl 命令

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Sun 2018-09-23 02:08:56 EDT; 6h 11min ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 11584 (sshd)
 CGroup: /system.slice/sshd.service
 └─11584 /usr/sbin/sshd -D
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Started OpenSSH server daemon.
Sep 23 02:09:15 vps.2daygeek.com sshd[11589]: Connection closed by 103.5.134.167 port 49899 [preauth]
Sep 23 02:09:41 vps.2daygeek.com sshd[11592]: Accepted password for root from 103.5.134.167 port 49902 ssh2

以上輸出的內容顯示了最近一次啟動 sshd 服務時 ssh 服務的監聽端口。但它不會將最新日志更新到輸出中。

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Thu 2018-09-06 07:40:59 IST; 2 weeks 3 days ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 1208 (sshd)
 CGroup: /system.slice/sshd.service
 ├─ 1208 /usr/sbin/sshd -D
 ├─23951 sshd: [accepted]
 └─23952 sshd: [net]
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: Invalid user pi from 95.210.113.142 port 51666
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: input_userauth_request: invalid user pi [preauth]
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:39 vps.2daygeek.com sshd[23911]: Failed password for invalid user pi from 95.210.113.142 port 51670 ssh2
Sep 23 12:50:39 vps.2daygeek.com sshd[23909]: Failed password for invalid user pi from 95.210.113.142 port 51666 ssh2
Sep 23 12:50:40 vps.2daygeek.com sshd[23911]: Connection closed by 95.210.113.142 port 51670 [preauth]
Sep 23 12:50:40 vps.2daygeek.com sshd[23909]: Connection closed by 95.210.113.142 port 51666 [preauth]

大部分情況下，以上的輸出不會顯示進程的實際端口號。這時更建議使用以下這個 journalctl 命令檢查日志文件中的詳細信息。

# journalctl | grep -i "openssh\|sshd"
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[997]: Received signal 15; terminating.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Stopping OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Started OpenSSH server daemon.

查看Linux進程占用端口號是我們系統管理員必會技能，以上6種查看LINUX系統進程已占用端口的命令大家至少要會其它一種

以下是端口分配類別：

0 - 1023：常用端口和系統端口

1024 - 49151：軟件的注冊端口

49152 - 65535：動態端口或私有端口

在 Linux 上的 /etc/services 文件可以查看到更多關于保留端口的信息。

# less /etc/services
# /etc/services:
# $Id: services,v 1.55 2013/04/14 ovasik Exp $
#
# Network services, Internet style
# IANA services version: last updated 2013-04-10
#
# Note that it is presently the policy of IANA to assign a single well-known
# port number for both TCP and UDP; hence, most entries here have two entries
# even if the protocol doesn't support UDP operations.
# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
# are included, only the more common ones.
#
# The latest IANA port assignments can be gotten from
# http://www.iana.org/assignments/port-numbers
# The Well Known Ports are those from 0 through 1023.
# The Registered Ports are those from 1024 through 49151
# The Dynamic and/or Private Ports are those from 49152 through 65535
#
# Each line describes one service, and is of the form:
#
# service-name port/protocol [aliases ...] [# comment]
tcpmux 1/tcp # TCP port service multiplexer
tcpmux 1/udp # TCP port service multiplexer
rje 5/tcp # Remote Job Entry
rje 5/udp # Remote Job Entry
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
systat 11/udp users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote
qotd 17/udp quote
msp 18/tcp # message send protocol (historic)
msp 18/udp # message send protocol (historic)
chargen 19/tcp ttytst source
chargen 19/udp ttytst source
ftp-data 20/tcp
ftp-data 20/udp
# 21 is registered to ftp, but also used by fsp
ftp 21/tcp
ftp 21/udp fsp fspd
ssh 22/tcp # The Secure Shell (SSH) Protocol
ssh 22/udp # The Secure Shell (SSH) Protocol
telnet 23/tcp
telnet 23/udp
# 24 - private mail system
lmtp 24/tcp # LMTP Mail Delivery
lmtp 24/udp # LMTP Mail Delivery

可以使用以下六種方法查看端口信息。

ss：可以用于轉儲套接字統計信息。

netstat：可以顯示打開的套接字列表。

lsof：可以列出打開的文件。

fuser：可以列出那些打開了文件的進程的進程 ID。

nmap：是網絡檢測工具和端口掃描程序。

systemctl：是 systemd 系統的控制管理器和服務管理器。

以下我們將找出 sshd 守護進程所使用的端口號。

方法 1：使用 ss 命令

ss 一般用于轉儲套接字統計信息。它能夠輸出類似于 netstat 輸出的信息，但它可以比其它工具顯示更多的 TCP 信息和狀態信息。

它還可以顯示所有類型的套接字統計信息，包括 PACKET、TCP、UDP、DCCP、RAW、Unix 域等。

# ss -tnlp | grep ssh
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

也可以使用端口號來檢查。

# ss -tnlp | grep ":22"
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

方法 2：使用 netstat 命令

netstat 能夠顯示網絡連接、路由表、接口統計信息、偽裝連接以及多播成員。

# netstat -tnlp | grep ssh
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 997/sshd
tcp6 0 0 :::22 :::* LISTEN 997/sshd

也可以使用端口號來檢查。

# netstat -tnlp | grep ":22"
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1208/sshd
tcp6 0 0 :::22 :::* LISTEN 1208/sshd

方法 3：使用 lsof 命令

lsof 能夠列出打開的文件，并列出系統上被進程打開的文件的相關信息。

# lsof -i -P | grep ssh
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 11584 root 3u IPv4 27625 0t0 TCP *:22 (LISTEN)
sshd 11584 root 4u IPv6 27627 0t0 TCP *:22 (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

也可以使用端口號來檢查。

# lsof -i tcp:22
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 1208 root 3u IPv4 20919 0t0 TCP *:ssh (LISTEN)
sshd 1208 root 4u IPv6 20921 0t0 TCP *:ssh (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

方法 4：使用 fuser 命令

fuser 工具會將本地系統上打開了文件的進程的進程 ID 顯示在標準輸出中。

# fuser -v 22/tcp
 USER PID ACCESS COMMAND
22/tcp: root 1208 F.... sshd
 root 12388 F.... sshd
 root 49339 F.... sshd

方法 5：使用 nmap 命令

# nmap -sV -p 22 localhost
Starting Nmap 6.40 ( http://nmap.org ) at 2018-09-23 12:36 IST
Nmap scan report for localhost (127.0.0.1)
Host is up (0.000089s latency).
Other addresses for localhost (not scanned): 127.0.0.1
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 7.4 (protocol 2.0)
Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 0.44 seconds

方法 6：使用 systemctl 命令

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Sun 2018-09-23 02:08:56 EDT; 6h 11min ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 11584 (sshd)
 CGroup: /system.slice/sshd.service
 └─11584 /usr/sbin/sshd -D
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Started OpenSSH server daemon.
Sep 23 02:09:15 vps.2daygeek.com sshd[11589]: Connection closed by 103.5.134.167 port 49899 [preauth]
Sep 23 02:09:41 vps.2daygeek.com sshd[11592]: Accepted password for root from 103.5.134.167 port 49902 ssh2

以上輸出的內容顯示了最近一次啟動 sshd 服務時 ssh 服務的監聽端口。但它不會將最新日志更新到輸出中。

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Thu 2018-09-06 07:40:59 IST; 2 weeks 3 days ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 1208 (sshd)
 CGroup: /system.slice/sshd.service
 ├─ 1208 /usr/sbin/sshd -D
 ├─23951 sshd: [accepted]
 └─23952 sshd: [net]
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: Invalid user pi from 95.210.113.142 port 51666
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: input_userauth_request: invalid user pi [preauth]
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:39 vps.2daygeek.com sshd[23911]: Failed password for invalid user pi from 95.210.113.142 port 51670 ssh2
Sep 23 12:50:39 vps.2daygeek.com sshd[23909]: Failed password for invalid user pi from 95.210.113.142 port 51666 ssh2
Sep 23 12:50:40 vps.2daygeek.com sshd[23911]: Connection closed by 95.210.113.142 port 51670 [preauth]
Sep 23 12:50:40 vps.2daygeek.com sshd[23909]: Connection closed by 95.210.113.142 port 51666 [preauth]

大部分情況下，以上的輸出不會顯示進程的實際端口號。這時更建議使用以下這個 journalctl 命令檢查日志文件中的詳細信息。

# journalctl | grep -i "openssh\|sshd"
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[997]: Received signal 15; terminating.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Stopping OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Started OpenSSH server daemon.

以下是端口分配類別：

0 - 1023：常用端口和系統端口

1024 - 49151：軟件的注冊端口

49152 - 65535：動態端口或私有端口

在 Linux 上的 /etc/services 文件可以查看到更多關于保留端口的信息。

# less /etc/services
# /etc/services:
# $Id: services,v 1.55 2013/04/14 ovasik Exp $
#
# Network services, Internet style
# IANA services version: last updated 2013-04-10
#
# Note that it is presently the policy of IANA to assign a single well-known
# port number for both TCP and UDP; hence, most entries here have two entries
# even if the protocol doesn't support UDP operations.
# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
# are included, only the more common ones.
#
# The latest IANA port assignments can be gotten from
# http://www.iana.org/assignments/port-numbers
# The Well Known Ports are those from 0 through 1023.
# The Registered Ports are those from 1024 through 49151
# The Dynamic and/or Private Ports are those from 49152 through 65535
#
# Each line describes one service, and is of the form:
#
# service-name port/protocol [aliases ...] [# comment]
tcpmux 1/tcp # TCP port service multiplexer
tcpmux 1/udp # TCP port service multiplexer
rje 5/tcp # Remote Job Entry
rje 5/udp # Remote Job Entry
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
systat 11/udp users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote
qotd 17/udp quote
msp 18/tcp # message send protocol (historic)
msp 18/udp # message send protocol (historic)
chargen 19/tcp ttytst source
chargen 19/udp ttytst source
ftp-data 20/tcp
ftp-data 20/udp
# 21 is registered to ftp, but also used by fsp
ftp 21/tcp
ftp 21/udp fsp fspd
ssh 22/tcp # The Secure Shell (SSH) Protocol
ssh 22/udp # The Secure Shell (SSH) Protocol
telnet 23/tcp
telnet 23/udp
# 24 - private mail system
lmtp 24/tcp # LMTP Mail Delivery
lmtp 24/udp # LMTP Mail Delivery

可以使用以下六種方法查看端口信息。

ss：可以用于轉儲套接字統計信息。

netstat：可以顯示打開的套接字列表。

lsof：可以列出打開的文件。

fuser：可以列出那些打開了文件的進程的進程 ID。

nmap：是網絡檢測工具和端口掃描程序。

systemctl：是 systemd 系統的控制管理器和服務管理器。

以下我們將找出 sshd 守護進程所使用的端口號。

方法 1：使用 ss 命令

ss 一般用于轉儲套接字統計信息。它能夠輸出類似于 netstat 輸出的信息，但它可以比其它工具顯示更多的 TCP 信息和狀態信息。

它還可以顯示所有類型的套接字統計信息，包括 PACKET、TCP、UDP、DCCP、RAW、Unix 域等。

# ss -tnlp | grep ssh
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

也可以使用端口號來檢查。

# ss -tnlp | grep ":22"
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

方法 2：使用 netstat 命令

netstat 能夠顯示網絡連接、路由表、接口統計信息、偽裝連接以及多播成員。

# netstat -tnlp | grep ssh
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 997/sshd
tcp6 0 0 :::22 :::* LISTEN 997/sshd

也可以使用端口號來檢查。

# netstat -tnlp | grep ":22"
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1208/sshd
tcp6 0 0 :::22 :::* LISTEN 1208/sshd

方法 3：使用 lsof 命令

lsof 能夠列出打開的文件，并列出系統上被進程打開的文件的相關信息。

# lsof -i -P | grep ssh
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 11584 root 3u IPv4 27625 0t0 TCP *:22 (LISTEN)
sshd 11584 root 4u IPv6 27627 0t0 TCP *:22 (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

也可以使用端口號來檢查。

# lsof -i tcp:22
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 1208 root 3u IPv4 20919 0t0 TCP *:ssh (LISTEN)
sshd 1208 root 4u IPv6 20921 0t0 TCP *:ssh (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

方法 4：使用 fuser 命令

fuser 工具會將本地系統上打開了文件的進程的進程 ID 顯示在標準輸出中。

# fuser -v 22/tcp
 USER PID ACCESS COMMAND
22/tcp: root 1208 F.... sshd
 root 12388 F.... sshd
 root 49339 F.... sshd

方法 5：使用 nmap 命令

# nmap -sV -p 22 localhost
Starting Nmap 6.40 ( http://nmap.org ) at 2018-09-23 12:36 IST
Nmap scan report for localhost (127.0.0.1)
Host is up (0.000089s latency).
Other addresses for localhost (not scanned): 127.0.0.1
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 7.4 (protocol 2.0)
Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 0.44 seconds

方法 6：使用 systemctl 命令

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Sun 2018-09-23 02:08:56 EDT; 6h 11min ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 11584 (sshd)
 CGroup: /system.slice/sshd.service
 └─11584 /usr/sbin/sshd -D
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Started OpenSSH server daemon.
Sep 23 02:09:15 vps.2daygeek.com sshd[11589]: Connection closed by 103.5.134.167 port 49899 [preauth]
Sep 23 02:09:41 vps.2daygeek.com sshd[11592]: Accepted password for root from 103.5.134.167 port 49902 ssh2

以上輸出的內容顯示了最近一次啟動 sshd 服務時 ssh 服務的監聽端口。但它不會將最新日志更新到輸出中。

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Thu 2018-09-06 07:40:59 IST; 2 weeks 3 days ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 1208 (sshd)
 CGroup: /system.slice/sshd.service
 ├─ 1208 /usr/sbin/sshd -D
 ├─23951 sshd: [accepted]
 └─23952 sshd: [net]
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: Invalid user pi from 95.210.113.142 port 51666
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: input_userauth_request: invalid user pi [preauth]
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:39 vps.2daygeek.com sshd[23911]: Failed password for invalid user pi from 95.210.113.142 port 51670 ssh2
Sep 23 12:50:39 vps.2daygeek.com sshd[23909]: Failed password for invalid user pi from 95.210.113.142 port 51666 ssh2
Sep 23 12:50:40 vps.2daygeek.com sshd[23911]: Connection closed by 95.210.113.142 port 51670 [preauth]
Sep 23 12:50:40 vps.2daygeek.com sshd[23909]: Connection closed by 95.210.113.142 port 51666 [preauth]

大部分情況下，以上的輸出不會顯示進程的實際端口號。這時更建議使用以下這個 journalctl 命令檢查日志文件中的詳細信息。

# journalctl | grep -i "openssh\|sshd"
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[997]: Received signal 15; terminating.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Stopping OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Started OpenSSH server daemon.

afd

以下是端口分配類別：

0 - 1023：常用端口和系統端口

1024 - 49151：軟件的注冊端口

49152 - 65535：動態端口或私有端口

在 Linux 上的 /etc/services 文件可以查看到更多關于保留端口的信息。

# less /etc/services
# /etc/services:
# $Id: services,v 1.55 2013/04/14 ovasik Exp $
#
# Network services, Internet style
# IANA services version: last updated 2013-04-10
#
# Note that it is presently the policy of IANA to assign a single well-known
# port number for both TCP and UDP; hence, most entries here have two entries
# even if the protocol doesn't support UDP operations.
# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
# are included, only the more common ones.
#
# The latest IANA port assignments can be gotten from
# http://www.iana.org/assignments/port-numbers
# The Well Known Ports are those from 0 through 1023.
# The Registered Ports are those from 1024 through 49151
# The Dynamic and/or Private Ports are those from 49152 through 65535
#
# Each line describes one service, and is of the form:
#
# service-name port/protocol [aliases ...] [# comment]
tcpmux 1/tcp # TCP port service multiplexer
tcpmux 1/udp # TCP port service multiplexer
rje 5/tcp # Remote Job Entry
rje 5/udp # Remote Job Entry
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
systat 11/udp users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote
qotd 17/udp quote
msp 18/tcp # message send protocol (historic)
msp 18/udp # message send protocol (historic)
chargen 19/tcp ttytst source
chargen 19/udp ttytst source
ftp-data 20/tcp
ftp-data 20/udp
# 21 is registered to ftp, but also used by fsp
ftp 21/tcp
ftp 21/udp fsp fspd
ssh 22/tcp # The Secure Shell (SSH) Protocol
ssh 22/udp # The Secure Shell (SSH) Protocol
telnet 23/tcp
telnet 23/udp
# 24 - private mail system
lmtp 24/tcp # LMTP Mail Delivery
lmtp 24/udp # LMTP Mail Delivery

可以使用以下六種方法查看端口信息。

ss：可以用于轉儲套接字統計信息。

netstat：可以顯示打開的套接字列表。

lsof：可以列出打開的文件。

fuser：可以列出那些打開了文件的進程的進程 ID。

nmap：是網絡檢測工具和端口掃描程序。

systemctl：是 systemd 系統的控制管理器和服務管理器。

以下我們將找出 sshd 守護進程所使用的端口號。

方法 1：使用 ss 命令

ss 一般用于轉儲套接字統計信息。它能夠輸出類似于 netstat 輸出的信息，但它可以比其它工具顯示更多的 TCP 信息和狀態信息。

它還可以顯示所有類型的套接字統計信息，包括 PACKET、TCP、UDP、DCCP、RAW、Unix 域等。

# ss -tnlp | grep ssh
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

也可以使用端口號來檢查。

# ss -tnlp | grep ":22"
LISTEN 0 128 *:22 *:* users:(("sshd",pid=997,fd=3))
LISTEN 0 128 :::22 :::* users:(("sshd",pid=997,fd=4))

方法 2：使用 netstat 命令

netstat 能夠顯示網絡連接、路由表、接口統計信息、偽裝連接以及多播成員。

# netstat -tnlp | grep ssh
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 997/sshd
tcp6 0 0 :::22 :::* LISTEN 997/sshd

也可以使用端口號來檢查。

# netstat -tnlp | grep ":22"
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1208/sshd
tcp6 0 0 :::22 :::* LISTEN 1208/sshd

方法 3：使用 lsof 命令

lsof 能夠列出打開的文件，并列出系統上被進程打開的文件的相關信息。

# lsof -i -P | grep ssh
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 11584 root 3u IPv4 27625 0t0 TCP *:22 (LISTEN)
sshd 11584 root 4u IPv6 27627 0t0 TCP *:22 (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

也可以使用端口號來檢查。

# lsof -i tcp:22
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 1208 root 3u IPv4 20919 0t0 TCP *:ssh (LISTEN)
sshd 1208 root 4u IPv6 20921 0t0 TCP *:ssh (LISTEN)
sshd 11592 root 3u IPv4 27744 0t0 TCP vps.2daygeek.com:ssh->103.5.134.167:49902 (ESTABLISHED)

方法 4：使用 fuser 命令

fuser 工具會將本地系統上打開了文件的進程的進程 ID 顯示在標準輸出中。

# fuser -v 22/tcp
 USER PID ACCESS COMMAND
22/tcp: root 1208 F.... sshd
 root 12388 F.... sshd
 root 49339 F.... sshd

方法 5：使用 nmap 命令

# nmap -sV -p 22 localhost
Starting Nmap 6.40 ( http://nmap.org ) at 2018-09-23 12:36 IST
Nmap scan report for localhost (127.0.0.1)
Host is up (0.000089s latency).
Other addresses for localhost (not scanned): 127.0.0.1
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 7.4 (protocol 2.0)
Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 0.44 seconds

方法 6：使用 systemctl 命令

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Sun 2018-09-23 02:08:56 EDT; 6h 11min ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 11584 (sshd)
 CGroup: /system.slice/sshd.service
 └─11584 /usr/sbin/sshd -D
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps.2daygeek.com sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps.2daygeek.com systemd[1]: Started OpenSSH server daemon.
Sep 23 02:09:15 vps.2daygeek.com sshd[11589]: Connection closed by 103.5.134.167 port 49899 [preauth]
Sep 23 02:09:41 vps.2daygeek.com sshd[11592]: Accepted password for root from 103.5.134.167 port 49902 ssh2

以上輸出的內容顯示了最近一次啟動 sshd 服務時 ssh 服務的監聽端口。但它不會將最新日志更新到輸出中。

# systemctl status sshd
● sshd.service - OpenSSH server daemon
 Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: enabled)
 Active: active (running) since Thu 2018-09-06 07:40:59 IST; 2 weeks 3 days ago
 Docs: man:sshd(8)
 man:sshd_config(5)
 Main PID: 1208 (sshd)
 CGroup: /system.slice/sshd.service
 ├─ 1208 /usr/sbin/sshd -D
 ├─23951 sshd: [accepted]
 └─23952 sshd: [net]
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: Invalid user pi from 95.210.113.142 port 51666
Sep 23 12:50:36 vps.2daygeek.com sshd[23909]: input_userauth_request: invalid user pi [preauth]
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23911]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): check pass; user unknown
Sep 23 12:50:37 vps.2daygeek.com sshd[23909]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=95.210.113.142
Sep 23 12:50:39 vps.2daygeek.com sshd[23911]: Failed password for invalid user pi from 95.210.113.142 port 51670 ssh2
Sep 23 12:50:39 vps.2daygeek.com sshd[23909]: Failed password for invalid user pi from 95.210.113.142 port 51666 ssh2
Sep 23 12:50:40 vps.2daygeek.com sshd[23911]: Connection closed by 95.210.113.142 port 51670 [preauth]
Sep 23 12:50:40 vps.2daygeek.com sshd[23909]: Connection closed by 95.210.113.142 port 51666 [preauth]

大部分情況下，以上的輸出不會顯示進程的實際端口號。這時更建議使用以下這個 journalctl 命令檢查日志文件中的詳細信息。

# journalctl | grep -i "openssh\|sshd"
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[997]: Received signal 15; terminating.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Stopping OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Starting OpenSSH server daemon...
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on 0.0.0.0 port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca sshd[11584]: Server listening on :: port 22.
Sep 23 02:08:56 vps138235.vps.ovh.ca systemd[1]: Started OpenSSH server daemon.

查看Linux系統中進程占用端口號是我們系統管理員必須掌握的一項技能，以上查看進程端口的6種方法我們至少要會一種，希望大家熟練掌握這些內容

標簽：紅河臨沂股票海口四川鎮江岳陽烏海

巨人網絡通訊聲明：本文標題《6種查看Linux進程占用端口號的方法詳解》，本文關鍵詞 6種,查看,Linux,進程,占用,；如發現本文內容存在版權問題，煩請?zhí)峁┫嚓P(guān)信息告之我們，我們將及時溝通與處理。本站內容系統采集于網絡，涉及言論、版權與本站無關。